Medenstar Co.Ltd
Special Dental Handpiece manufacture
Add to Cart
Torque Head High Speed Dental Handpiece Electric , High Performance Dental Drill
Description:
Handpiece With Quick Coupling:M4/B2
Chuck Type:Push button
Bearing:Ceramic bearing
Workign Air Pressure:0.20-0.25MPa(0.22MPa prefrred)
Rotation Speed:350,000-400,000R.P.M(Standard Head);
280,000-320,000R.P.M(Torque Head);
Bur Applicable:Φ1.595-1.600mm
Spray:triple water spray
Product Parts:
Consists of handpiece head, handle, caudal thread, cartridge.
Working Conditions:
1. Air pressure 0.25~0.30mpa,must be filtrated.
2. Use high speed dental bur with shaft diameter Φ1.59~1.60mm×21-23mm and roghtness less than 0.8um.
3. The amount of handpieces spray or water spray should be able to adjusted.
4. Hard glass fiber,can be repeatedly sterilized in high temperautre and pressure.
Product Scope:
Only used for drilling, molar of stomatology clamping high-speed dental burs.
HPA011QC Handpiece we Provide Three Kind Of Head For Choice
| HPA011SQC | HPA011TQC |
| Standard Head | Torque Head |
Features:
1. Compatible with 45 degree m-ax handpiece
2. Push button type/key type handpiece
3. clean head system with one hole water spray
4. Torque head and more powerful
5. Unti-retraction
6. Two holes and four holes, can directly use to the dental unit
7. Ceramic bearing from Germany cartridge with more long life
dental high speed handpieces Advantage:
1. Ceramic bearing longer service life,higher accuracy,lower noise,less vibration.
2. Non-scratch design,comfortable for hand feeling, easy to clean.
3. Quiet operation not more than 65db to protect your hearing.
Our Advantages
* Full way services and technical support offered by our professional engineers.
* We highly appreciated any types of inquiry and all of them will be replied in 14 hours.
* Your goods could be shipped to you as your requirement such as by air or by sea, full way tracking for your cargos offered before the arrival of the goods.
1. Professional skillfal worker
2. More than ten years experience in this industry
3. Manufacturer/wholesale
4. Various products
5. Quality certificate
Maintenance:
1. Considering safety first, please be careful to use it with full attention.
2. Be limited to dentists who held the dental treatment qualifications.
3. Strictly forbid decomposition and reconstruction by unauthorized.
4. Please run point testing on outside of patients oral beforehand. If feel anomalies, please stop using immediately and contact with our after-sales center.
5. When appears abnormal during using, please stop it immediately and contact with our after-sales center.
6. It will cause a high noise using a center-vibration or bended bur and a handpiece of which bearing has been worn, A long time in this state will be harm to people’s hearing. Forbid using a vibration or bended bur, if appear high noise, please replace the shaft core early
7. Do not use a bending , cracking, deformation and unqualified bur. If using it, may cause a snap, or a flying off to injury accident during operation process.
8. Please ensure the bur chuck be clean. If with contaminant inside of it, may causes bur clamping weaken or shaft core vibration.
9. Please run the bur under the provision rotation-speed by bur manufacturers.
10. Do not crash, especially to avoid falling.
11. Please install a bur or a standard stick before using.
12. Aslo remember to install a bur or a standard stick when not in using.
13. Please unload the bur and handpiece when the running stopped in completely.