Electric Handpiece Low Speed Rotary Handpiece 2 Holes Or 4 Holes Option

Electric Handpiece Low Speed Rotary Handpiece 2 Holes Or 4 Holes Option

Low speed handpiece series is made up of straight head/contra angle, the connection for tubing of motor and adopts ISO9168 inter-standard (2 holes or 4 holes option)

Good performance, durable, can accomplish multiple functions such as dental implant and therapy, acting as a necessary equipment for general dental treatment and dentists daily working.

Description:

4:1 reduction contra-angle

4:1 gear ratio, Internal irrigation system

Air pressure:245-392kPa

Atomized water pressure:200kPa

Atomized air pressure: 200kPa

Rotation Speed:3500-5000r/min

Push button type chuck

Bur applicable:Φ2.35mm , Φ1.60mm

Noise:≤70dB

Feature:

1. Handpiece easily to be taken apart, totally detachable, convient for repair and maintenance

2. Chinese ceramic bearing, durable and long life

3. Chuck type: push button

4. External and internal irrigation, better cooling

5. High precision gear low noise

6. ISO standard connector, easy compatible with air motor

7. Match up with any kinds of dental implant system

Maintenance:
1. Considering safety first, please be careful to use it with full attention.
2. Be limited to dentists who held the dental treatment qualifications.
3. Strictly forbid decomposition and reconstruction by unauthorized.
4. Please run point testing on outside of patients oral beforehand. If feel anomalies, please stop using immediately and contact with our after-sales center.
5. When appears abnormal during using, please stop it immediately and contact with our after-sales center.
6. It will cause a high noise using a center-vibration or bended bur and a handpiece of which bearing has been worn, A long time in this state will be harm to people’s hearing. Forbid using a vibration or bended bur, if appear high noise, please replace the shaft core early
7. Do not use a bending , cracking, deformation and unqualified bur. If using it, may cause a snap, or a flying off to injury accident during operation process.
8. Please ensure the bur chuck be clean. If with contaminant inside of it, may causes bur clamping weaken or shaft core vibration.
9. Please run the bur under the provision rotation-speed by bur manufacturers.
10. Do not crash, especially to avoid falling.
11. Please install a bur or a standard stick before using.
12. Aslo remember to install a bur or a standard stick when not in using.
13. Please unload the bur and handpiece when the running stopped in completely.